Address : 1508， BLK 5，FANHAI SOHO,WANGJIADUN,JIANGHAN DISTRICT,WUHAN, CHINA
How to identify workmanship and quality of workwear?
2016-07-28 10:08:32
First, workwear fabrics
The quality of the fabric, it will directly affect the quality of clothes, some clothes manufacturers in the bidding when the design model used is relatively high-grade fabric, and cut corners in the actual production process, the fabric made a small proportion changes, this small change in layman we can not see, but in practical applications began to unravel
Second, the appearance of workwear
Clothes should be clean, equatorial, symmetrical, upright folded, each part of a pressed, seamless hot, no dead fold, products, wireless head, no hair yarn. Line fit and fabric, including color, texture, fastness, shrinkage and other aspects of the two should be roughly the same, in order to guarantee the intrinsic quality of the clothing and appearance quality prevail. Button color should be commensurate with the fabric color.
Third, the chromatic aberration
Clothes color is specified requirements of raw materials, namely fabric for clothing requirements. According to the provisions of the relevant national standards for color, the collar of clothing, fabric bags, trousers side seams is the primary site, color is higher than four other surface parts of four. Apparel products color testing, the tool is borrow "color fastness fading sample card." The sample card is one of the national standards established by the former Ministry of Textile Industry. Sample card with five pairs of gray scale samples, divided into five grades. Five representatives of the best fade fastness, color zero, four to one representative of the degree of fading relatively incremental, one being the most severe.
Fourth, overalls defects
Standards, each individual site only allows a defect. Independent parts of the garment is the division of the area, according to the primary and secondary parts of the garment, 1,2,3,4 four sub-regions. Each site is a region on the garment. As before there are two coat tablets, each chest are of a site, each site is an independent site, a two parts is two separate parts. This independent site in the chest, both the garment is another patch pocket and flap. Standards for each individual site, allowing only one defect, that there are defects on the garment, in this part of the independent patch pockets and bags are not allowed to have defects on the cover. Different types of defects due to fabrics and different, determination according to standard regulations.
Fifth,sewing clothes.
Specified in the open wire stitch length density (including but not open wire dark line) pitch, 3cm14 ~ 18 stitches per. Many varieties of fabrics, to ensure product appearance and firm, different fabrics should choose a different pitch. Such as rigid fabric stitch generally a little thin, soft texture of the fabric in general can pitch a little secret.
Sixth, clothes size specifications.
Type of clothes set, must be carried out according to relevant regulations, "apparel series' standards. Size standard of tolerance range is limited.
For more information,please visit our website:www.chinaworkwearsupplier.com
